 |
|
|
|
LEASE AN AIR BURNER S-327
|
Call For Pricing
|
|
Call to get more information on leasing an environmentally alternative method to open burns. The Air Curtain Burner S-327 has a 27 foot long fire box and manifold and is approximately 12 feet wide by 12 feet high. The air quality meets or exceeds applicable US-EPA regulations. The air curtain burner S-327 is shipped completely assembled - No on-site set-up; Ready for immediate use. Average Through-Put 6-10 Tons per Hour.
Quantity: 1
Manufacturer: Air Burners, LLC
Contact:
Used Equipment Exchange
Location:
Goodlettsville, TN United States
|
|
|
(6)ARM AIR SEAL W/ MAX. LOG SIZE 27" DIA.FEED DRIV
|
Call For Pricing
|
|
|
(6)ARM AIR SEAL W/ MAX. LOG SIZE 27" DIA.FEED DRIVE MOTOR-HI SPEED IS 40 HP.1800 R.P.M., ON LOW SPEED IS 30 HP.1800 R.P.M.FEED DRIVE REDUCER IS REX PLANETARY W/ A RATIO 11:1 RING DRIVE MOTOR IS 100 HP.1200 R.P.M. COMES W/ SOME SPARE PARTS
Quantity: 1
Manufacturer: Nicholson
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
ONE USED 30" CAMBIO DEBARKER
5 TOOL ARM RING - "
|
Call For Pricing
|
|
|
ONE USED 30" CAMBIO DEBARKER
5 TOOL ARM RING - "U" SHAPED TOOL ARMS.
75 HP. - 875-1180 R.P.M. RING DRIVE MOTOR
10 HP. 875 - 1180 R.P.M. 460 VOLT SPIKE ROLL DRIVE MOTOR.
Quantity: 1
Manufacturer: Kockums
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
MACHINE HAS BEEN DISMANTLED, EVERY PART INSPECTED
|
Call For Pricing
|
|
|
MACHINE HAS BEEN DISMANTLED, EVERY PART INSPECTED ANY PARTS THAT HAVE LESS THAN 80% SERVICE LIFE HAS BEEN REPLACED.30 DAY WARRANTY AFTER STARTUP. RING DRIVE MOTOR 75HP, FORANO RING 25" 6 TOOL ARM. HAS A STANDARD CAMBIO TOOL TENSION SYSTEM
Quantity: 1
Manufacturer: Kockums
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
ONE USED 35" CAMBIO DEBARKER. HAS HYDRAULIC CHARGI
|
Call For Pricing
|
|
|
ONE USED 35" CAMBIO DEBARKER. HAS HYDRAULIC CHARGING UNIT
WITH FLOATING HOUR GLASS ROLL AND LOG STOPS.
Quantity: 1
Manufacturer: Kockums
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
USED NICHOLSON 44" DEBARKER FRAME W/ A-1-77 RING.M
|
Call For Pricing
|
|
|
USED NICHOLSON 44" DEBARKER FRAME W/ A-1-77 RING.MACHINE IS MISSING THE IN&OUT HOLDDOWNS & FEED
CHAINS.G.E. DC MOTOR 50 HP. 1310-1750 R.P.M. TO A TO 30.8 RATIO REDUCTION ON FEED DRIVE & SPROCKET OFF INCOMING TRANSFER CHAIN.HPU IS NEEDED.
Quantity: 1
Manufacturer: Nicholson
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
ONE USED CAMBIO 35" DEBARKER
SER. #37
5 TOOL A
|
Call For Pricing
|
|
|
ONE USED CAMBIO 35" DEBARKER
SER. #37
5 TOOL ARMS - 75 HP. RING DRIVE MOTOR
THIS MACHINE IS IN GOOD CONDITION
Quantity: 1
Manufacturer: Kockums
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
TOOL ARM T-STYLE, WESTINGHOUSE RING DRIVE MOTOR A
|
Call For Pricing
|
|
|
TOOL ARM T-STYLE, WESTINGHOUSE RING DRIVE MOTOR AND A GENCO 10 HP 1150 RPM G.E. FEEDROLL DRIVE.MACHINE HAS 10" DIAMETER AIR CYLINDERS FOR FEED ROLLS AND COMES W/ OPERATOR CONTROL CONSOLE.SOME SPARE PARTS ARE AVAILABLE.
Quantity: 1
Manufacturer: Kockums
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
6TOOL ARMS W/SEAL RING,8"DIA. AIR CYLIND. FOR KNIF
|
Call For Pricing
|
|
|
6TOOL ARMS W/SEAL RING,8"DIA. AIR CYLIND. FOR KNIFE ARMS.SPIRAL ROLLS W/ 10" AIR CYLD. FOR FEED ROLL SUPPORT ARMS. SPUR GEARS-FAIR/GOOD CONDITION.RING DRIVE & FEED DRIVE MOTORS MISSING,RING PULL OUT CYLINDER& OPERATOR CONTROL CONSOLE ADDED.
Quantity: 1
Manufacturer: Nicholson
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
HAS 36 IN. DIAM. EIGHT (8) PAIR WHEELS MOUNTED ON
|
Call For Pricing
|
|
|
HAS 36 IN. DIAM. EIGHT (8) PAIR WHEELS MOUNTED ON 4-7/16 IN. SHAFT. THE TRAVEL IS 26 FT.COMES WITH ONE 20 HP. D.C. DRIVE CARRIAGE - ONE 25 D.C. DRIVE TRUNION ROLLS - ONE 100/50 HP. TWO (2) SPEED MOTOR. THIS UNIT COMES WITH D.C. CONTROLS.
Quantity: 1
Manufacturer: Schurman
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
ONE USED CAMBIO 30 IN. DEBARKER "U" SHAPED TOOL AR
|
Call For Pricing
|
|
|
ONE USED CAMBIO 30 IN. DEBARKER "U" SHAPED TOOL ARMS - HAS A BROOK 20 HP. FEED WORKS DRIVE MOTOR
Quantity: 1
Manufacturer: Kockums
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
ONE USED SALEM 35 IN. DEBARKER WITH OPERATOR CONTR
|
Call For Pricing
|
|
|
ONE USED SALEM 35 IN. DEBARKER WITH OPERATOR CONTROL CAB AND CONTROLS
Quantity: 1
Manufacturer: Salem
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
THIS IS A SIX (6) TOOL ARM ROTOR WITH "U" SHAPED T
|
Call For Pricing
|
|
|
THIS IS A SIX (6) TOOL ARM ROTOR WITH "U" SHAPED TOOL ARMS WITH FOUR PYRAMO TIPS 75 HP. - 890 R.P.M. WESTINGHOUSE RING DRIVE MOTOR - 10 HP. 1745 R.P.M. FEEDROLL DRIVE GEARHEAD
Quantity: 1
Manufacturer: Kockums
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
1ST RING IS 4TOOL ARM W/ CUTTERS FOR CUTTING BARK
|
Call For Pricing
|
|
|
1ST RING IS 4TOOL ARM W/ CUTTERS FOR CUTTING BARK OR CAN BE CHANGED W/ANOTHER SET OF STANDARD KNIFE ARMS &TIPS -2ND RING IS(6)TOOL ARM W/ STANDARD ARMS & TIPS RING ASSEMBLY'S ARE AIR SEAL RINGS.COMES W/OPERATOR CONTROL CONSOLE & SPARE PARTS
Quantity: 1
Manufacturer: Nicholson
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
ONE USED KOCKUMS 40 IN. DEBARKER 5 TOOL ARMS COME
|
Call For Pricing
|
|
|
ONE USED KOCKUMS 40 IN. DEBARKER 5 TOOL ARMS COMES WITH RING DRIVE MOTOR AND D.C. FEEDWORKS DRIVE.COMPLETE WITH OPERATOR CONTROLS
Quantity: 1
Manufacturer: Kockums
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
ONE USED SODERHAMN CAMBIO 30 IN. RING DEBARKER FI
|
Call For Pricing
|
|
|
ONE USED SODERHAMN CAMBIO 30 IN. RING DEBARKER FIVE (5) TOOL ARMS WITH "U" SHAPED LINDSAY ARMS COMPLETE W/ 75 HP. RING DRIVE MOTOR - HYDRAULIC DRIVES ON FEED WORKS ALONG WITH HYDRAULIC RESERVOIR AND PUMPS
Quantity: 1
Manufacturer: Kockums
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
ONE USED CAMBIO - SODERHAMN 30 IN. DEBARKER HAS A
|
Call For Pricing
|
|
|
ONE USED CAMBIO - SODERHAMN 30 IN. DEBARKER HAS A LINDSAY AIR BAG ROTOR - FIVE (5) "U" TYPE TOOL ARMS 75 HP. RING DRIVE MOTOR AND 20 HP. TEFC FEED WORKS MOTOR
Quantity: 1
Manufacturer: Kockums
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
LARGE LOG BYPASS (HIGH LIFT RING) - HYDRAULIC HOLD
|
Call For Pricing
|
|
|
LARGE LOG BYPASS (HIGH LIFT RING) - HYDRAULIC HOLD DOWN ROLLS &HYDRAULIC RING CENTERING IS OPERATED BY A 40 HP. HPU W/TANDEM PUMPS,AIR RING SEAL FIVE (5)TOOL ARM W/ REPLACEABLE CARBIDE TIPS, TOO MUCH INFO ON THIS, CONTACT DEALER
Quantity: 1
Manufacturer: Nicholson
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
|
5 TOOL ARM ROTOR W/ A RECONDITIONED RING BEARING A
|
Call For Pricing
|
|
|
5 TOOL ARM ROTOR W/ A RECONDITIONED RING BEARING ASSEMBLY 6) NEW SPIKE ROLLS - AIR CYLINDERS REBUILT AND NEW RING DRIVE BELT,COMES WITH 50 HP.
Quantity: 1
Manufacturer: Kockums
Contact:
Jem Machine Inc.
Location:
Grangeville , ID United States
|
|
Browse All Equipment Listings
